A lumber town named for Charles Shelton Vidor
Concrete Contractors in Vidor, TX
Bigger lots, long drives and shop pads, built on a base that can handle Southeast Texas rain.
- Free estimate at your property, with every line of the price written out
- Slope, base and runoff worked out for Beaumont's 65-inch rain years
- City permit and 311 inspection steps confirmed for your address first

Concrete for Vidor's Larger Lots
Vidor sits about 6 miles east of Beaumont where Interstate 10 meets Farm to Market Road 105, and concrete contractors here deal with more room per lot than in the older cities to the south. The city covers about 12 square miles for under 10,000 residents, and the 2022 American Community Survey puts owner occupancy at 73.8%. With that much space, a longer drive, a shop slab or a covered patio is a realistic project for many owners.
A town that started in the woods
Vidor grew out of the timber trade. Railroad construction in 1898 opened the area to heavy logging, and Charles Shelton Vidor of the Miller-Vidor Lumber Company gave the town its name. When the timber ran low, the company moved to Lakeview in 1924. The Miller-Vidor subdivision was laid out in 1929. The town incorporated in 1960, and the Texas State Historical Association counts 2,136 people in 1950 and 9,738 in 1970, so a large share of Vidor's homes went up in those two decades.
Shop slabs and outbuilding pads
A shop, barn or detached garage needs a slab built for its loads. We plan these differently from a patio:
- Thickened edges under walls, usually wider and deeper than the field of the slab
- Rebar on chairs at mid-depth, not mesh lying in the dirt
- A vapor barrier under enclosed buildings to slow ground moisture
- Anchor bolts or embeds set during the pour where the builder needs them
- Saw-cut joints laid out so cracks follow straight lines
We coordinate with whoever is putting up the building so the slab dimensions, door openings and anchor locations match their plans.
Long driveways and culverts
Many Vidor homes sit back from the road, and a long concrete drive is a big investment. We look at where water crosses the drive and whether a culvert under the entrance is sized and set correctly. A drive that dams a ditch will crack and wash out at the edges no matter how well it is poured. For long runs, we break the pour into sections with proper joints and plan truck access so we are not driving loaded trucks over fresh work.
After Harvey
Hurricane Harvey in 2017 caused extensive damage in Vidor and the surrounding area, and Rita in 2005 and Ike in 2008 hit the town hard as well. Floodwater can scour the base from under slab edges and leave voids that only show up when a panel cracks months later. When we look at older concrete in Vidor, we tap and probe edges for hollow spots. If the base is gone, we remove and rebuild rather than patch over it.
Everyday work around the house
Not every job is a big slab. We also handle:
- Patios off the back door, plain or stamped, sloped away from the house
- Sidewalks from the drive to the porch and around the side of the house
- Stamped concrete for entries and patios that want a finished look
- Repairs on cracked panels, sunken sections and broken steps
Each of these starts the same way: a compacted base, the right thickness and a plan for water.
Permits and the city
Vidor is an incorporated city in Orange County. Before work at the street, in a ditch or across a culvert, we check what the city and county require. Most backyard work is on private property, but we confirm instead of assuming. Your written estimate notes what was checked and what, if anything, needs a permit.
Vidor Background
- Location. Vidor sits at Interstate 10 and FM 105 in Orange County, about 6 miles northeast of Beaumont.
- Lumber beginnings. Railroad building in 1898 brought heavy logging; the Miller-Vidor subdivision was laid out in 1929 after the lumber company moved to Lakeview in 1924.
- Growth years. The population rose from 2,136 in 1950 to 9,738 in 1970, and the town incorporated in 1960.
- Homeowner town. About 73.8% of households owned their homes in the 2022 survey, across roughly 12 square miles.

Our Services in Vidor, TX
Vidor Questions
How thick should a shop slab be in Vidor?
It depends on what goes in it. A shop for cars and tools is usually thicker than a patio, with thickened edges and rebar. Heavy equipment or a vehicle lift calls for more. We size it after hearing what the building will hold.
Can you pour a long driveway in sections?
Yes. Long drives are often poured in stages with planned joints between them. That also lets us keep trucks off concrete that has not cured.
My drive crosses a ditch. Do I need a culvert?
If water flows there, usually yes. A culvert sized and set at the right grade keeps water moving under the drive instead of over or around it. We check what the city or county requires before we set one.
Free Estimates in Vidor, TX
Free estimates on Vidor driveways, shop slabs and patios.
Concrete Contractors Near Vidor
- Concrete Contractors in Beaumont, TX
- Concrete Contractors in Port Arthur, TX
- Concrete Contractors in Nederland, TX
- Concrete Contractors in Port Neches, TX
- Concrete Contractors in Groves, TX
- Concrete Contractors in Lumberton, TX
- Concrete Contractors in Orange, TX
- Concrete Contractors in Bridge City, TX
- Concrete Contractors in Silsbee, TX
- Concrete Contractors in Sour Lake, TX
- Concrete Contractors in Kountze, TX
- Concrete Contractors in Pinehurst, TX
- Concrete Contractors in West Orange, TX
- Concrete Contractors in Central Gardens, TX
- Concrete Contractors in Fannett, TX
- Concrete Contractors in Bevil Oaks, TX
- Concrete Contractors in Mauriceville, TX
- Concrete Contractors in China, TX
- Concrete Contractors in Pinewood Estates, TX
- Concrete Contractors in Hamshire, TX